German China

USA: Fertilizer Production Lower CO2 Emissions: Producing Ammonia Through Electrochemical Processes

Source: Press release

Ammonia is commonly used in fertilizer because it has the highest nitrogen content of commercial fertilizers, making it essential for crop production. However, its production releases carbon dioxide. Electrochemical processes could reduce this impact on the climate.

Related Company

Dr. Abdoulaye Djire (left) and Denis Johnson (right) analyze a coloring solution after an experimental run. A coloring solution is created after each nitrogen reduction reaction experiment, and the level of ammonia produced is indicated by how green the solution turns after a waiting period.
Dr. Abdoulaye Djire (left) and Denis Johnson (right) analyze a coloring solution after an experimental run. A coloring solution is created after each nitrogen reduction reaction experiment, and the level of ammonia produced is indicated by how green the solution turns after a waiting period.
(Source: Texas A&M Engineering)

Blinn-Brenham/USA — Two carbon dioxide molecules are made for every molecule of ammonia produced, contributing to excess carbon dioxide in the atmosphere. A team from the Artie McFerrin Department of Chemical Engineering at Texas A&M University consisting of Dr. Abdoulaye Djire, assistant professor, and graduate student Denis Johnson, has furthered a method to produce ammonia through electrochemical processes, helping to reduce carbon emissions. This research aims to replace the Haber-Bosch thermochemical process with an electrochemical process that is more sustainable and safer for the environment.

Since the early 1900s, the Haber-Bosch process has been used to produce ammonia. This process works by reacting atmospheric nitrogen with hydrogen gas. A downside of the Haber-Bosch process is that it requires high pressure and high temperature, leaving a large energy footprint. The method also requires hydrogen feedstock, which is derived from nonrenewable resources. It is not sustainable and has negative implications on the environment, expediting the need for new and environmentally friendly processes.

The researchers have proposed using the electrochemical nitrogen reduction reaction (NRR) to produce ammonia from atmospheric nitrogen and water. The benefits of using an electrochemical method include using water to provide protons and the ability to produce ammonia at ambient temperature and pressure. This process would potentially require lower amounts of energy and would be less costly and more environmentally friendly than the Haber-Bosch process.

The NRR works by using an electrocatalyst. For this process to succeed, nitrogen must bond to the surface and break apart to produce ammonia. In this study, the researchers used MXene, a titanium nitride, as the electrocatalyst. What differentiates this catalyst from others is that nitrogen is already in its structure, allowing for more efficient ammonia formulation.

“It’s easier for ammonia to form because the protons can attach to the nitrogen in the structure, form the ammonia and then the ammonia will leave out of the structure,” said Johnson. “A hole is made in the structure that can pull the nitrogen gas in and separate the triple bond.”

The researchers found that using titanium nitride induces a Mars-van Krevelen mechanism, a popular mechanism for hydrocarbon oxidation. This mechanism follows a lower energy pathway that would allow for higher ammonia production rates and selectivity because of the nitrogen from the titanium nitride catalyst.

Without modifications to the materials, the researchers reached a selectivity of 20 percent, which is the ratio of the desired product formed compared to the undesired product formed. Their method could potentially reach a higher selectivity percentage with modifications, forging a new pathway to ammonia production through electrochemical processes.

“The Department of Energy has set a goal of a selectivity of 60 percent, which is a challenging number to reach,” said Johnson. “We were able to reach 20 percent using our material, showcasing a method that we might be able to take advantage of moving forward. If we upgrade our material, can we reach 60 percent soon? That is the question we will continue to work to answer.”

This research could potentially reduce the carbon footprint and global energy usage on a larger scale.

“In the future, this could be a major scientific reform,” said Djire. “About 2 percent of the world’s total energy is used for ammonia production. Reducing that huge number would drastically reduce our carbon footprint and energy consumption.”

Ti2N nitride MXene evokes the Mars-van Krevelen mechanism to achieve high selectivity for nitrogen reduction reaction

Subscribe to the newsletter now

Don't Miss out on Our Best Content

By clicking on „Subscribe to Newsletter“ I agree to the processing and use of my data according to the consent form (please expand for details) and accept the Terms of Use. For more information, please see our Privacy Policy.

Unfold for details of your consent

(ID:48195736)