German China

Singapore: Reduced Energy Loss

How Perovskite Solar Cells Can Capture More Electricity

| Editor: Alexander Stark

NTU Singapore and Dutch scientists show how perovskite solar cells can capture more electricity.
Gallery: 1 image
NTU Singapore and Dutch scientists show how perovskite solar cells can capture more electricity. (Source: NTU Singapore)

Scientists from Nanyang Technological University, Singapore (NTU Singapore) in a collaboration with the University of Groningen (UG) in the Netherlands, have developed a method to analyse which pairs of materials in next-generation perovskite solar cells will harvest the most energy.

Singapore — In a paper published in Science Advances, physicists Professor Sum Tze Chien from NTU and Professor Maxim Pshenichnikov from UG used extremely fast lasers to observe how an energy barrier forms when perovskite is joined with a material that extracts the electrical charges to make a solar cell.

Conventionally, a solar cell absorbs sunlight and converts it to electrical charge. During this process, the light particles have more energy than needed to generate the electrical charges in the solar cells. This excess energy gives rise to what are called “hot” charges, which lose their excess energy very fast as heat (within one picosecond), leaving only “cold” charges available for electrical power generation.

Self-Healing Polymers Prevent Leakage of Lead from Solar Cells

Japan: Material Science

Self-Healing Polymers Prevent Leakage of Lead from Solar Cells

19/06/2019 - A protective layer of epoxy resin helps prevent the leakage of pollutants from perovskite solar cells (PSCs), report scientists from the Okinawa Institute of Science and Technology Graduate University (Oist). Adding a “self-healing” polymer to the top of a PSC can radically reduce how much lead it discharges into the environment. This gives a strong boost to prospects for commercializing the technology. read...

This energy loss is why conventional solar cells have a theoretical limit of 33 % for power conversion efficiency. The best perovskite solar cells so far have exhibited 25 % efficiency, almost on a par with the best performing silicon solar cells. Scientists believe that if “hot” charges could be extracted fast enough, then together with the harvested “cold” charges, it could lead to a “hot carrier” solar cell with a theoretical efficiency of up to 66 %.

The key to extracting these hot charges quickly enough lies in the selection of the correct ‘extraction’ material to bond with the perovskite. Prof Sum’s team has now devised a way to measure which are the best extraction materials. NTU's latest findings show how ‘hot’ these charges have to be, in order to cross over the energy barrier without being wasted as heat. According to Prof Sum, the Associate Chair (Research) at NTU’s School of Physical and Mathematical Sciences, this highlights the need for better pairing of ‘extraction’ materials with perovskites if we want to lower this energy barrier for more efficient solar cells.

Perovskite solar cells’ primary advantage over silicon solar cells is that they are cheap and easy to manufacture using common chemistry laboratory supplies and do not need silicon’s costly and energy intensive manufacturing processes. Prof Sum and his collaborators previously published in Science their discovery that “hot” charges in perovskites lose their excess energies more slowly than in other semiconductors. The team subsequently slowed this energy loss further using nano-sized perovskites, making it easier to extract the hot charges as electricity.

Non-Toxic and Efficient Films for Solar Cells

Japan: Bismuth Sulfide

Non-Toxic and Efficient Films for Solar Cells

20/09/2018 - Researchers at Osaka University have developed a two-step process that can produce materials for optoelectronic devices such as solar cells with good morphological properties and excellent photoresistor performance. The films are based on bismuth sulfide which is non-toxic. read...

In their latest experiments, the NTU and UG scientists ‘watched’ the solar cells at work using femtosecond pulsed lasers that can measure processes that occur roughly 100 billion times faster than a camera flash. The scientists studied the behaviour of the “hot” charges that are generated and how they moved through the perovskite into the extractor material without losing their excess energy as heat. Prof Pshenichnikov said, “Such high efficiency solar cells could mean the possibility of increasing the energy supply from solar panels without the need for more surface area.”

Giving an independent comment on the research, Dr Henk Bolink from the Institut de Ciència Molecular (IC Mol) of the Cientific Parc of the University of Valencia, said besides a suitable light absorbing layer, solar cells also need charge extraction layers that selectively extract either electrons or holes to the two terminals of the cell.

Reference: The paper, “Hot Carrier Extraction in CH3NH3PbI3 Unveiled by Pump-Push-Probe Spectroscopy,” is published in Science Advances on 15 Nov 2019. S. S. Lim, D. Giovanni, Q. Zhang, A. Solanki, N. F. Jamaludin, J. W. M. Lim, N. Mathews, S. Mhaisalkar, M. S. Pshenichnikov, T. C. Sum, Hot carrier extraction in CH3NH3PbI3 unveiled by pump-push-probe spectroscopy. Sci. Adv. 5, eaax3620 (2019). DOI: 10.1126/sciadv.aax3620’.

Comments are being loaded ....

Leave a comment

The comment is checked by an editor and will be released soon.

  1. Avatar
    Avatar
    Edited by at
    Edited by at
    1. Avatar
      Avatar
      Edited by at
      Edited by at

Comments are being loaded ....

Report comment

Kommentar Freigeben

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

Freigabe entfernen

Der untenstehende Text wird an den Kommentator gesendet, falls dieser eine Email-hinterlegt hat.

copyright

This article is protected by copyright. You want to use it for your own purpose? Contact us via: support.vogel.de/ (ID: 46249963 / Laborpraxis Worldwide)