Germany: Nano-Materials New Nano-Coatings Facilitate Maintenance of Heat Exchangers
At the Hannover Messe, the Leibniz Institute for New Materials (INM) will be introducing new nano-coatings that reduce the effort required for cleaning heat exchangers as well as their corrosion. In these new coatings, the research scientists combine antiadhesive, anticorrosive and, on demand, also antimicrobial properties.
Hannover/Germany — The researches achieve the anti-adhesive characteristics by introducing hydrophobic compounds that are similar to common Teflon. These inhibit the formation of any undesired biofilm and allow residues to be transported out more easily before they clog up the channels of the heat exchangers. At the same time the researcher use structures that act as diffusion barrier in their coatings. These inhibit the sensitivity for corrosion prevoked from corrosive substances or aggressive cleaning agents. To prevent microbes, bacteria or fungus from adhering to surfaces, the scientists additionally use colloidal copper in the coating. Due to the oxygen or water that is present in many processes, copper ions are released from the copper colloids. These migrate to the surface and, as a result of their antimicrobial effect, they prevent microbes from proliferation and growth.
“In addition, we can keep the paint chemically stable. Otherwise it would not withstand the aggressive chemicals that are required for cleaning,” explained Carsten Becker-Willinger, Head of Nanomers at INM. Adding that the paint could also be adapted for special mechanical loads, he explained that this was important for paint used in heat exchangers, too. Due to mechanical vibrations, the individual plates of the heat exchangers could be subjected to a certain amount of abrasion at points of contact.
Principally, the paint developed could also be used in other contexts, Becker-Willinger said, including the large sector of air conditioning with heat exchangers. Furthermore, the paint could be used for equipment in water purification plants, for example.
According to the developers, the paint can be applied using standard methods such as spraying or immersion and subsequent hardening. It can be used on stainless steel, steel, titanium or aluminum. By selectively adapting individual constituents, the developers are able to respond to the particular, special requirements of interested users.
The developers will be demonstrating their results and the possibilities they offer at stand B46 in hall 2 at this year's Hannover Messe which takes place from April 24 to 28.
This article is protected by copyright. You want to use it for your own purpose? Contact us at support.vogel.de (ID: 44650625)