Next-Generation Solar Cells Teflon-Like Coating Boosts Stability of Perovskite Solar Cells to Record Level

An international research team led by Prof. Antonio Abate has achieved a major breakthrough in solar technology: by introducing a thin, Teflon-like molecular coating between key layers, they have made perovskite solar cells both highly efficient and exceptionally stable.

Perovskite solar cells are inexpensive to produce and generate a high amount of electric power per surface area. However, they are not yet stable enough, losing efficiency more rapidly than the silicon market standard. Now, an international team led by Prof. Dr. Antonio Abate has dramatically increased their stability by applying a novel coating to the interface between the surface of the perovskite and the top contact layer. This has even boosted efficiency to almost 27 %, which represents the state-of-the-art. After 1,200 hours of continuous operation under standard illumination, no decrease in efficiency was observed. The study involved research teams from China, Italy, Switzerland and Germany and has been published in Nature Photonics.

“We used a fluorinated compound that can slide between the perovskite and the buckyball (C60) contact layer, forming an almost compact monomolecular film,” explains Abate. These Teflon-like molecular layer chemically isolate the perovskite layer from the contact layer, resulting in fewer defects and losses. Additionally, the intermediate layer increases the structural stability of both adjacent layers, particularly the C60 layer, making it more uniform and compact. “It's actually like the Teflon effect,” says Abate. “The intermediate layer forms a chemical barrier that prevents defects while still allowing the electric contact.”

Much of the experimental research was conducted by the first author, Guixiang Li, while he was a PhD student in Abate’s team. Guixiang Li is now a professor at Southeast University in Nanjing, China, and continues the collaboration. The study also involved teams from the École Polytechnique Fédérale de Lausanne (EPFL) and Imperial College London.

High Efficiency Plus Stability

Using this approach, perovskite solar cells can achieve a lab-scale efficiency of 27 percent, which is slightly higher than the 26 percent efficiency without the intermediate layer. The increase in stability is huge: even after 1,200 hours of continuous illumination by a ‘standard sun’, this high efficiency does not decrease. “1,200 hours correspond to one year of outdoor use,” Abate emphasises. In the comparison cell without the ‘Teflon layer’, the efficiency dropped by 20 percent after just 300 hours. The coating also provides exceptional thermal stability when aged for 1,800 hours at 85 °C and tested for 200 cycles between –40 °C and +85 °C. The perovskite solar cells presented here have an inverted (p-i-n) structure, which lends itself particularly well to use in tandem cells, for example in combination with silicon cells.

“The idea of using such Teflon-like molecules to form an intermediate film has been on my mind since my postdoctoral days in Henry Snaith’s lab, who did pioneer research on the perovskite materials. At that time, in 2014, the efficiency was only 15 percent, declining significantly within a few hours. We have made huge progress,” says Abate. These results pave the way for the next generation of highly efficient and highly stable perovskite-based optoelectronic devices.

Original Article: Stabilizing high-efficiency perovskite solar cells via strategic interfacial contact engineering; Nature Photonics; DOI:10.1038/s41566-025-01791-1

(ID:50620361)